Qnubu PREN0028, User Manual

Page: 6 / 8

CONFIGURATION
QNUBU
ENGLISH
PRESSURE RELIEF VALVES:
Before pressing, tighten the knob clockwise (to the right), then turn the handle
to apply pressure. Independent heating plate: turn the knob slightly to the left,
at this point the heating plates can be loosened. e pressure Counterclockwise:
Reducing pressure.
-Countdown:
After platen closed, press “TIME” start Counting
down press time.
When turning the knob to the left, do not turn the knob
too many times, just gently turn it one or two times.
TIP
-Set Temperature:
Press Set button 1x time,Screen show “SH” and PV side number blinking, the
temp can now be set using the to increase or decrease temperature.
-Set Compression Time:
Press Set button 2x time,screen show “SE”the time can now be set
using the to increase or decrease time.
-Confirm setting:
After finish setting of time and temperature you should
press set once again to confirm the your setting, screen will exit setting
mode and start heating.
TEMPERATURE & TIME SETTING:
Increase button/
countdown button
Set button Decrease
button
¡DONT FORCE THE PRESS!
IF YOU TRY TO APPLY OVER-PRESSURE
THE PRODUCT WILL BE DAMAGED