116
From
Forward to
219.87.144.205:8000
192.168.1.1:80
219.87.144.205:8001
192.168.1.101:80
219.87.144.205:8002
192.168.1.102:80
219.87.144.205:8003
192.168.1.103:80
Step 2. Add camera to the VioStor by entering the IP address of the camera in the “IP
Address” settings, and the public IP address of the router and the mapped ports of the
camera to the “WAN IP Address” settings.
Note: When configuring the network camera, WAN IP and LAN IP must be entered.
To open FTP (port 21) and SMB (port 445) of the VioStor on WAN, you have to set the
following port mapping settings:
From
Forward to
219.87.144.205:21
192.168.1.1:21
219.87.144.205:139
192.168.1.1:139
219.87.144.205:445
192.168.1.1:445
After finishing the above two steps, you can access the VioStor via WAN by entering the IP
address http://219.87.144.205:8000 in the IE browser. Then login the VioStor via the
correct user name and password.
If the port specified to the VioStor is 80, you can enter http://219.87.144.205 to access the
VioStor as the default port of HTTP is 80.
Note: If the router does not use a fixed IP, you will need to configure DDNS on the router.
Other configurations are the same as above.
