2. Product Overview
This chapter provides basic information about the QNAP TVS-x72N NAS.
About the TVS-x72N
The TVS-x72N is a high performance NAS powered by an Intel® Core™ i3-8100T processor and supports a
maximum of 32 GB of DDR4 memory. It features an HDMI port for external displays, as well as a USB One
Touch Copy port for easy data backup and transfer. In addition to the one 5GbE network port and two Gigabit
Ethernet ports, the TVS-x72N is equipped with one PCIe 3.0 x4 slot and one PCIe 3.0 x16 slot to provide a
wide range of possibilities, including extra data management capabilities and additional multimedia support.
Hardware Specifications
Ordering P/N
Drive bays
Memory
Power supply
TVS-672N
6
Intel® Core™ i3-8100T
Single
TVS-872N
8
Intel® Core™ i3-8100T
Single
Component
TVS-672N
TVS-872N
Processor
CPU
Intel® Core™ i3-8100T
Frequency
4-core /4-thread 3.1 GHz
Architecture
x86 64-bit
Encryption engine
AES-NI
Graphics
Intel® UHD Graphics 630 graphics processor
Tip
You can install a graphics card in the PCIe slot.
Memory
Pre-installed memory
4 GB RAM: 2 x 2 GB SODIMM
DDR4
8 GB RAM: 2 x 4 GB SODIMM
DDR4
Memory slots
2 x SODIMM DDR4
Important
Use only QNAP memory modules to maintain system
performance and stability. For NAS devices with more
than one memory slot, use QNAP modules with
identical specifications.
Using unsupported modules may degrade
performance, cause errors, or prevent the operating
system from starting.
Maximum memory
32 GB: 2 x 16 GB
Flash memory
5 GB (Dual boot OS protection)
Storage
Drive bays
6 x 3.5-inch SATA 6 Gbps
8 x 3.5-inch SATA 6 Gbps
Note
The SATA 6 Gbps drive is backward compatible with 3
Gbps.
TVS-x72N User Guide
Product Overview
4
