Chapter 3.
USB One Touch Copy
This feature is only provided by the NAS models with a USB One Touch Copy button.
System
Number of seconds (press the one
touch copy button to trigger data
copy)
All NAS models
0.5 sec
Data Copy by the Front USB Port
The NAS supports instant data copy backup from the external USB device to the NAS or the
other way round by the front one touch copy button. To use this function, follow the steps
below:
1.
Make sure a hard drive is installed and formatted on the NAS. The default network
share Qusb or Usb is created.
2.
Turn on the NAS.
3.
Configure the behavior of the Copy button on “Backup Station” > “External Backup” >
“USB one touch copy” page.
4.
Connect the USB storage device to the front USB port of the NAS.
5.
Press the Copy button. The USB LED will flash. The data will be copied to or from
the USB device according to the NAS settings.
Note:
This feature adopts incremental backup. After the first time data backup, the NAS
only copies the changed files since the last backup.
Summary of Contents for Turbo NAS TVS-71 Series
Page 1: ...QNAP Turbo NAS TVS x71 Series Hardware User Manual 2014 QNAP Systems Inc All Rights Reserved...
Page 13: ...http www qnap com for details...
Page 25: ...3 Press insert the module fixing 4 Replace the cover and tighten the rear screws...
Page 35: ...3 Unplug the failed power supply 4 Plug in a new power supply to the NAS 5 Turn on the NAS...
