QNAP TS-h 90FU Series User Manual Download | Manualshive

Page: 45 / 75

background image

TS-h1090FU

QNAP recommends always using dual-path configuration to prevent storage downtime due to

expansion unit failure or cable disconnection. Single-path configuration should be used only in a

situation where it is not possible to use dual-path configuration.

3. Power on the expansion units.

4. Verify that the expansion units are recognized by the device.

a. Log on to QuTS hero as administrator.

b. Go to Main Menu > Storage & Snapshots > Overview > System .

c. Verify that the expansion units are listed.

Connecting USB Expansion Units

To connect the TS-hx90FU to USB expansion units, USB Type-A to USB Type-C cables are required. For

required accessories details, see

Expansion Unit Installation

1. Connect the expansion unit to the NAS.

a. Connect the USB cable to the USB Type-C port on the expansion unit.

TS-hx90FU User Guide

Installation and Configuration

44

«
...
43
44
45
46
47
...
»

Summary of Contents for TS-h 90FU Series












































































Reviews:

No comments

Related manuals for TS-h 90FU Series

Brand: IBM Pages: 438

eServer 200 xSeries

Brand: IBM Pages: 128

eServer 232 xSeries

Brand: IBM Pages: 174

Brand: Oki Pages: 121

SuperServer 5013C-MT

Brand: Supero Pages: 98

UniServer R4300 G5

Brand: H3C Pages: 16

AirLive WP-203G

Brand: Ovislink Pages: 132

Transport TX46 (B4985) Service

Brand: TYAN Pages: 75

FlexWATCH 1110L

Brand: Seyeon Technology Pages: 96

Brand: IBM Pages: 1730

Brand: Moxa Technologies Pages: 100

Brand: RIOT Pages: 18

Brand: Black Box Pages: 48

NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT

Brand: Red Hat Pages: 318

Brand: Supermicro Pages: 78

GV-Video Server

Brand: GeoVision Pages: 179

Brand: Mozaex Pages: 66

Brand: Intel Pages: 74

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands