manualshive.com logo in svg

QNAP TS-832PX, User Manual

Share
Download
QNAP TS-832PX User Manual Download Page 20

• Observe electrostatic discharge (ESD) procedures to avoid damage to components.

•

Moving fan blades:

 Keep your hands and other body parts away from moving fan

blades.

•

Other moving components:

 Keep your hands and other body parts away from other

moving components.

1.

Check the expansion cards and brackets supported by your model on the QNAP website.

a.

Go to 

www.qnap.com/compatibility

.

b.

Click 

Search by NAS

.

c.

Specify the number of bays and the specific model of your NAS.

d.

Under 

Category

, select the component or device type.

e.

Locate a specific component or device model in the list.

f.

Optional: Click the corresponding 

Note

 icon to view more information.

2.

Power off the device.

3.

Disconnect the power cord from the electrical outlet.

4.

Disconnect all cables and external attachments.

5.

Remove the case cover.

a.

Loosen the screws.

b.

Slide the cover back.

c.

Lift the cover off the device. 

TS-832PX User Guide

Installation and Configuration   

19

Summary of Contents for TS-832PX






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands