Reset Button
Operation
User Action
Result
Basic system reset
Press and hold the button for 3
seconds.
The following settings are reset to
default:
• System administrator
password: MAC address of
adapter 1 without special
characters. For example, if the
MAC address of adapter 1 is
11:22:33:44:55:66, then the
admin password will be
112233445566.
Tip
You can find the MAC
address of adapter 1
using Qfinder Pro. A label
attached to the device
also lists the address as
MAC1.
• TCP/IP configuration:
• Obtain IP address
settings automatically via
DHCP
• Disable jumbo frames
• If port trunking is enabled
(multi-LAN models only),
the port trunking mode is
reset to “Active Backup
(Failover)”.
• System port: 8080 (system
service port)
• Security level: Low (Allow all
connections)
• VLAN: Disabled
Advanced system reset
Press and hold the button for 15
seconds.
The default factory settings are
restored.
• To retrieve old data after an
advanced system reset,
recreate the previous folder
structure on the NAS.
USB One Touch Copy Button
The USB One Touch Copy button allows you to copy data backups from a USB device to the NAS or from
the NAS to a USB device.
TS-x53D User Guide
Basic Operations
43
