QNAP TS 53D Series User Manual Download Page 36

Page: 36 / 60

12.

Connect all cables and external attachments.

13.

Connect the power cord to the electrical outlet.

14.

Power on the NAS.

Installing Expansion Units

The TS-x53D supports USB and SATA JBOD expansion units. For details, please see table below.

Note

For details on expansion unit compatibility and maximum expansion units supported, go to

https://www.qnap.com/en/compatibility-expansion/

Expansion Unit Model

Description

Required Accessories

TR-002

• Uses a USB 3.2 Gen 2 Type-C

interface

• Supports SATA

USB 3.2 Gen 2 Type-A to Type-C
cable

TR-004

• Uses a USB 3.2 Gen 1 Type-C

interface

• Supports SATA

USB 3.2 Gen 1 Type-A to Type-C
cable

TL-D400S

• Uses an SFF-8088 interface

• Supports SATA HDD/SSD

• 1 x SFF-8088 connector cable

• QXP-400eS-A1164 host bus

adapter

TL-D800S

• Uses an SFF-8088 interface

• Supports SATA HDD/SSD

• 2 x SFF-8088 connector

cables

• QXP-800eS-A1164 host bus

adapter

TS-x53D User Guide

Installation and Configuration

Summary of Contents for TS 53D Series





























































Search results

Summary of Contents for TS 53D Series

Reviews:

Related manuals for TS 53D Series

Brands by name

Popular brands

QNAP TS 53D Series, User Manual

Search results

Summary of Contents for TS 53D Series

Reviews:

Related manuals for TS 53D Series

Brands by name

Popular brands