• For security purposes, the CloudLink remote connection service will be disabled on your
NAS after initialization. You can enable it by connecting to QTS through LAN and then
installing CloudLink.
7.
Click
Next
.
8.
Perform any of the following actions.
• To check for the latest available version, click
Start
.
The wizard downloads the latest available version, and then the NAS restarts after the download
is complete. If a newer version is not available, the wizard automatically displays the
Smart
Installation Guide
.
• To install the out-of-the-box version, click
Skip
.
9.
Click
Start Smart Installation Guide
.
10.
Specify the following information.
•
NAS name
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
•
Password
: Specify an administrator password with 1 to 64 characters. The password supports all
ASCII characters.
11.
Click
Next
.
12.
Specify the time zone, date, and time.
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
13.
Click
Next
.
14.
Select
Obtain an IP address automatically (DHCP)
.
15.
Click
Next
.
16.
Select the types of devices that you will use to access shared folders on the NAS.
17.
Click
Next
.
18.
Review the settings.
19.
Click
Apply
.
A confirmation message appears.
Warning
Clicking
Confirm
deletes all data on the drive before installing QTS.
20.
Click
Confirm
.
QTS is installed.
TS-431XeU User Guide
Installation and Configuration
24
