2. Product Overview
This chapter provides basic information about the QNAP device.
About the TS-364
The TS-364 is equipped with an Intel® Celeron® N5105/N5095 quad-core processor (up to 2.9 GHz burst)
and can support up to 16 GB of DDR4 memory. The HDMI connections provide 4k multimedia output and the
USB One Touch Copy feature allows for easy data backup and synchronization. In addition to its two memory
slots, the TS-364 comes with two M.2 PCIe SSD slots to accommodate your data management needs.
Hardware Specifications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
QNAP Warranty Terms and Conditions
.
Ordering P/N
Memory
TS-364-N5095-4G
4 GB
Component
TS-364-N5095-4G
Processor
CPU
Intel® Celeron® N5105/N5095
Frequency
4-core/4-thread up to 2.90 GHz burst
Architecture
64-bit x86
Encryption engine
AES-NI
Graphics
Intel® UHD Graphics
Memory
Pre-installed memory
4 GB RAM: 1 x 4 GB DDR4 SODIMM
Memory slots
2 x DDR4 SODIMM
Important
Use only QNAP memory modules to maintain system
performance and stability. For NAS devices with more
than one memory slot, use QNAP modules with
identical specifications.
Using unsupported modules may degrade
performance, cause errors, or prevent the operating
system from starting.
Maximum memory
16 GB RAM: 2 x 8 GB
Flash memory
5 GB (dual-boot OS protection)
Storage
Drive bays
3 x 3.5-inch SATA 6 Gbps
TS-364 User Guide
Product Overview
4
