Connecting USB Expansion Units
The TS-x32XU supports a maximum of two USB expansion units and is compatible with the following
models:
• UX-800U-RP
• UX-1200U-RP
1.
Connect the expansion unit to the NAS.
a.
Connect the USB cable to the USB 3.0 Type-B port on the expansion unit.
b.
Connect the USB cable to a USB 3.0 Type-A port on the NAS.
2.
Power on the expansion units.
3.
Verify that the expansion units are recognized by the NAS.
a.
Log on to QTS as administrator.
b.
Go to
Main Menu
>
Storage & Snapshots
>
Overview
>
System
.
c.
Verify that the expansion units are listed.
Hot-swapping Redundant Power Supply Units
NAS devices with redundant power supply units (PSUs) support hot-swapping.
1.
Power off the NAS.
2.
Disconnect the power cord from the electrical outlet and the PSU that you want to replace.
3.
Firmly press the latch toward the handle and then pull the PSU out.
TS-x32XU User Guide
Installation and Configuration
18
