manualshive.com logo in svg

QNAP TS 31P2 Series, User Manual, Page: 31 / 45

Share
Download
QNAP TS 31P2 Series User Manual Download Page 31

LED

Status

Description

Gigabit LAN
(Rear)

Left Green

The Ethernet port is connected to a 1 gigabit network.

Left Amber

The Ethernet port is connect to a 100 megabit network.

Left Off

The NAS is not connected to a network.

Right Green

The Ethernet port is connected to a network.

Right flashes Green

The NAS is being accessed on this Ethernet port.

Right Off

The Ethernet port is not connected to a network.

Drive

Green

The drive is ready.

Flashes Green

The drive is being accessed.

Red

The drive has encountered an error.

Flashes Red 5 times per
second

The drive is being located in the operating system.

Off

No drive is detected.

USB - One
Touch Copy

Blue

A USB external storage device has been mounted
successfully on the USB One-Touch Copy port.

Flashes Blue 2 times per
second

• A USB external storage device connected to the USB

One Touch Copy port is being mounted.

• A USB external storage device connected to the USB

One Touch Copy port is being disconnected.

• A USB external storage device connected to the USB

One Touch Copy port is being accessed.

Off

No USB external storage device is connected.

USB

Blue

A USB external storage device is connected to a USB port.

Off

No USB external storage device is connected.

Beep Alarm

Duration

Frequency

Description

Short beep (0.5 seconds) 1

• The NAS is starting up.

• The NAS is shutting down (software shutdown).

• The user pressed the Reset button.

• The operating system was updated.

3

The user tried to copy the NAS data to the external
storage device from the front USB port, but the data
cannot be copied.

TS-x31P2 User Guide

Basic Operations   

30

Summary of Contents for TS 31P2 Series














































Reviews:

No comments