QNAP TS-231+, Hardware User Manual

Page: 64 / 135

64
Network Expansion Card Compatibility
Bracket A
SP-BRACKET-10G-T
(X520-T2) Intel
®
Ethernet Server Adapter X520-T2(E10G42B)
Bracket B
SP-BRACKET-10G-X520SR2
(X520-SR2/X520-DA2) 1. Intel
®
Ethernet Server Adapter
X520-SR2(E10G42BFSR)
2. Intel
®
Ethernet Server Adapter
X520-DA2(E10G42BTDA)
Bracket C
SP-BRACKET-10G-EMU
(Emulex) 1. Emulex OneConnect 10GbE Network Adapters, SFP+
Direct attach copper (OCe11102-NX, OCe14102-NX)
2. Emulex OneConnect 10GbE Network Adapters, Short
reach optical (OCe11102-NM)
3. Emulex OneConnect 10GbE Network Adapters, SFP+
Direct attach copper (OCe11102-IX)
4. Emulex OneConnect 10GbE Network Adapters, Short
reach optical (OCe11102-IM)
1.
Turn off the NAS. Disconnect the power adaptor, network cable(s), and any other
connectors or cables from the NAS.
2.
Before installing the network expansion card, put on an antistatic wrist strap to prevent
electrostatic discharge. The crocodile clip should be connected to the ground.
3.
Loosen the screws on the rear of the NAS.