Reset Button
Operation
User Action
Result
Basic system reset
Press and hold the button for 3 seconds.
The following settings are reset to default:
• System administrator password: The
default password is the first MAC
address in uppercase letters without
special characters. For example, if
the first MAC address is 00-08-9B-
F6-15-75, then the admin password
will be 00089BF61575.
Tip
You can find the first MAC
address using Qfinder Pro. A
label attached to the device
also lists the address as MAC1.
• TCP/IP configuration:
• Obtain IP address settings
automatically via DHCP
• Disable jumbo frames
• If port trunking is enabled (multi-
LAN models only), the port
trunking mode is reset to “Active
Backup (Failover)”.
• System port: 8080 (system service
port)
• Security level: Low (Allow all
connections)
• LCD panel password: (blank)
• VLAN: Disabled
Advanced system
reset
Press and hold the button for 15 seconds. The default factory settings are restored.
To retrieve old data after an advanced
system reset, recreate the previous folder
structure on the NAS.
LEDs
LEDs indicate the system status and related information when the device is powered on. The following LED
information applies only when the drive is correctly installed and when the device is connected to the
network or to a host.
For details on the location of the LEDs, see
.
TS-130 User Guide
Basic Operations
23
