QNAP TS-1079 Pro Software User Manual Download Page 29

Page: 29 / 321

2.6 Migrating from Old NAS

Users can migrate their QNAP NAS to another Turbo NAS model with all the data and

configuration retained by simply installing the hard drives of the original (source) NAS on

the new (destination) NAS according to its original hard drive order and restart the NAS.

Due to different hardware design, the NAS will automatically check if a firmware update

is required before system migration. After the migration has finished, all the settings and

data will be kept and applied to the new NAS. However, the system settings of the

source NAS cannot be imported to the destination NAS via "System Administration" >

"Backup/Restore Settings". Configure the NAS again if the settings were lost.

The NAS models which support system migration are listed below.

Sourc e NAS

De s tina tion NAS

Re m a rk

TS-x10, TS-x12, TS-x19,

TS-x20, TS-x21, TS-x39,

TS-509, TS-809, SS-x39,

SS-469, TS-x59, TS-x69,

TS-x70, TS-x79

TS-x10, TS-x12, TS-x19,

TS-x20, TS-x21, TS-x39,

TS-509, TS-809, SS-x39

Firmware update required.

TS-x10, TS-x12, TS-x19,

TS-x20, TS-x21, TS-x39,

TS-509, TS-809, SS-x39,

TS-x59, TS-x69, TS-x70,

TS-x79

TS-x59, TS-x69, TS-x70,

TS-x79, SS-469 Pro

Firmware update not

required.

Note:

The destination NAS should contain enough drive bays to house the hard drives of

the source NAS.

SS-x39 and SS-469 Pro series support only 2.5-inch hard disk drives.

A NAS with encrypted disk volume cannot be migrated to a NAS which does not

support file system encryption. File system encryption is not supported by TS-

110, TS-119, TS-210, TS-219, TS-219P, TS-x20, TS-x21, TS-410, TS-419P, TS-

410U, TS-419U, TS-119P+, TS-219P+, TS-419P+, TS-112, TS-212, TS-412, TS-

419U+, TS-412U, TS-420U and TS-421U.

Summary of Contents for TS-1079 Pro


































































































































































































































































































































Search results

Summary of Contents for TS-1079 Pro

Reviews:

Related manuals for TS-1079 Pro

Brands by name

Popular brands

QNAP TS-1079 Pro, Software User Manual

Search results

Summary of Contents for TS-1079 Pro

Reviews:

Related manuals for TS-1079 Pro

Brands by name

Popular brands