4.
Load the tray into the drive bay.
a.
Insert the tray into the bay.
b.
Push the handle.
5.
Power on the JBOD enclosure.
Note
The JBOD enclosure may take up to 30 seconds to detect the new drive.
Installing 2.5-inch Drives on 3.5-inch Trays
For the list of compatible drive models, go to
https://www.qnap.com/compatibility
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades:
Keep your hands and other body parts away from moving fan
blades.
•
Other moving components:
Keep your hands and other body parts away from other
moving components.
1.
Power off the JBOD enclosure.
TL-R1200C-RP User Guide
Hardware Installation
12
