Home
/
QNAP
/
QTS 4.5 Series
/
User Manual

QNAP QTS 4.5 Series, User Manual, Page: 566 / 575

Share

551 pages before
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575

Page: 566 / 575

QNAP QTS 4.5 Series User Manual Download Page 566

Note

Remote Support will also be disabled when the support team has completed the remote
session, or when the private key has expired.

Diagnostic Tool

The Diagnostic Tool provides several features for checking the stability of the NAS. Users can export system
kernel records to quickly check whether abnormal operations have recently occurred. In addition, users can
send the records to QNAP technical support for further investigation. The Diagnostic Tool also provides
features for checking the file system, hard drives, and RAM.

Downloading Logs

1.

Open

Helpdesk

.

2.

Go to

Diagnostic Tool

>

Download Logs

.

3.

Click

Download

.

Helpdesk generates a ZIP file.

4.

Download the ZIP file.

5.

Optional: Send the file to QNAP through

for further investigation.

Performing an HDD Standby Test

1.

Open

Helpdesk

.

2.

Go to

Diagnostic Tool

>

HDD Standby Test

.

3.

Select an enclosure to analyze.

4.

Click

Start

.

Helpdesk performs an HDD standby test.

5.

Optional: Click

Download

to download the test reports.

Performing an HDD Stress Test

1.

Open

Helpdesk

.

2.

Go to

Diagnostic Tool

>

HDD Stress Test

.

3.

Click

Start

.

Helpdesk performs an HDD stress test.

4.

Optional: Click

Download

to download the test reports.

QTS 4.5.x User Guide

Helpdesk

565

«
...
564
565
566
567
568
...
»

Summary of Contents for QTS 4.5 Series
































































































































































































































































































































































































































































































































































































Reviews:

No comments