QNAP QMiro-201W User Manual Download

Page: 13 / 57

3. Installation and Access

This chapter provides specific hardware installation and router access steps.

Installation

Installation Requirements

Category

Item

Environment

• Room temperature: 0˚C to 40˚C (32˚F to 104˚F)

• Non-condensing relative humidity: 10% to 90%

• Wet-bulb temperature: 27˚C (80.6˚F)

• Flat, anti-static surface without exposure to direct sunlight, liquids,

or chemicals

Hardware and peripherals

Network cable

Tools

Anti-static wrist strap

Setting Up the Router

Place your router in an environment that meets the requirements.
For details, see

Installation Requirements

Power on the router.

Check if the LED status is green.
For details, see

Front Panel LED

Connect the router to the network and the computer.
For details, see

Connecting the Router to the Internet

Configure the router settings.
For details, see

Configuring QuRouter

Binding the Router with a QNAP ID

Connecting the Router to the Internet

Connect the power cord to the electrical outlet.
The router powers on and the front panel LED turns green.

Connect the router to the Internet.

Connect an Ethernet cable to the WAN port of the router.

Connect the other end of the Ethernet cable to the ISP gateway.

Connect an Ethernet cable to the LAN port of the router.

Connect the other end of the Ethernet cable to the Ethernet port of the computer.

Verify that the router is recognized by the computer.

QMiro-201W User Guide

Installation and Access

Summary of Contents for QMiro-201W


























































Search results

Summary of Contents for QMiro-201W

Reviews:

Related manuals for QMiro-201W

Brands by name

Popular brands

QNAP QMiro-201W, User Manual

Search results

Summary of Contents for QMiro-201W

Reviews:

Related manuals for QMiro-201W

Brands by name

Popular brands