Note: Ensure that the thermal sensor is in contact with the M.2 SSD.
5.
Attach the cooling module to the QM2 board and secure screws.
Installing a QM2 Card in a NAS
1.
Power off the NAS.
2.
Unplug the power cord from the electrical outlet.
3.
Disconnect all cables and external attachments.
4.
Remove the screws on the back of the NAS that connect the case cover to the chassis.
Summary of Contents for QM2 Series
Page 2: ...Thermal pad kit Rubber pad black kit M 2 SSD screw pack ...
Page 5: ...a Insert M 2 SSD into M 2 socket b Secure M 2 SSD with screw ...
Page 11: ...a Remove screws from existing bracket b Remove bracket from card ...
Page 12: ...c Attach required bracket to card using the same screws 10 Install the QM2 card ...