Setting
User Action
Enable MU-MIMO
Enable multiple-input, multiple-output technology (MU-MIMO) to allow
the router to communicate concurrently with multiple wireless devices.
Transmission Power
Select one of the MU-MIMO transmission powers:
• High
• Medium
• Low
Bandwidth
Specify one of the following frequencies:
• 20 MHz
• 20/40 MHz
• 20/40/80 MHz
• 20/40/80/160 MHz
Important
20/40/80/160 MHz is available only for the 5 GHz
band.
Enable DFS Channels
Enable Dynamic Frequency Selection (DFS) to utilize more channels
and avoid wireless interference.
Important
This setting is available only for the 5 GHz band.
Channels
Select the DFS channel that is less frequently used.
Note
The channel is set to Auto by default to avoid radio
frequency interference.
Enable CTS/RTS
Specify a CTS/RTS value between 1 and 2347.
4. Click Apply.
QuRouter updates the advanced band settings.
Configuring the Guest Wireless Network
1. Go to Wireless/Virtual Access Point > Guest Wireless Network .
2. Select Enable.
3. Configure the guest wireless network settings.
Setting
User Action
SSID
Specify a service set identifier (SSID) that can contain up to 32
characters.
Note
The SSID is case-sensitive.
QHora-301W User Guide
Network Settings
41
