QNAP EvoStor-400CA, User Manual, Page: 14 / 41

14
3.1.2 Configuring EvoStor
By factory default, the value of SCSI ID Set is 0 and the password is eight empty
characters.
• Configure SCSI ID Set
Step 1
Press the Function switch and the LCD panel will display the following
information:
Press the Enter button to proceed.
Step 2
Use the Up and Down buttons to enter the password. The following
message will then be shown:
Press the Enter button to confirm or ESC button to return to the previous
menu.
Step 3
Use the Up and Down buttons to adjust the SCSI value and press the
Enter button. Make sure the SCSI ID does not duplicate with that of other
SCSI devices.
Step 4
Press the Enter button to confirm the SCSI value or press ESC to cancel.
Step 5
When completing the setting, restart the computer. Press any key to
return to the menu on the LCD panel.