QNAP 4713213517826, Quick Installation Manual

Page: 6 / 30

The QSW series supports DHCP client by default. When connected to a network, the switch will obtain
an IP address from a DHCP server automatically. You can then use Qfinder to locate the switch and
access the web user interface.
If your network is not connected to a DHCP server, you can access the web user interface by changing
your computer
’
s IP address to 169.254.100.101.
The default IP address of the QSW is 169.254.100.100.
Default username: admin
Default password: same as the MAC Address
When logging in for the first time, you will be prompted to set a new username and password. QNAP strongly
recommends setting a new username and password for security purposes.
Note: After configuration, ensure that you change your computer’s IP address back to the original setting.
Accessing the Web User Interface
Web User Interface Login
EN