QMTECH XILINX SPARTAN-7, User Manual, Page: 3 / 15

QM_Spartan-7 Development Board User Manual V01
1.
Introduction
1.1
Document Scope
This demo user manual introduces the QM_Spartan-7 development board and describes how to setup
the development board running with application software Xilinx Vivado 2018.2. Users may employee the
on board rich logic resource FPGA XC7S15-1FTGB196C to implement various applications. The
development board has 88 non-multiplexed FPGA IOs for extending customized modules, such as UART
module, CMOS/CCD camera module, LCD/HDMI/VGA display module etc.
1.2
Kit Overview
Below section lists the parameters of the QM_Spartan-7 development board:

On-Board FPGA: XC7S15-1FTGB196C;

On-Board FPGA external crystal frequency: 50MHz;

XC7S15-1FTGB196C has rich block RAM resource up to 360Kb;

XC7S15-1FTGB196C has 12,800 logic cells;

On-Board N25Q064 SPI Flash, 8M bytes for user configuration code;

On-Board 3.3V power supply for FPGA by using MP2359 wide input range DC/DC;

QM_Spartan-7 development board has two 50p, 2.54mm pitch headers for extending user IOs. All
IOs are precisely designed with length matching;

QM_Spartan-7 development board has 3 user switches;

QM_Spartan-7 development board has 4 user LEDs;

QM_Spartan-7 development board has JTAG interface, by using 6p, 2.54mm pitch header;

QM_Spartan-7 development board has USB to UART Serial Port, by using Silicon Labs
’ CP2102-
GMR chip.

QM_Spartan-7 development board PCB size is: 6.6cm x 5.7cm;

Default power source for board is from Mini USB: 1A@5V DC;
Figure 1-1. QM_Spartan-7 Development Board Overview