QMS PS 410, User Manual

Page: 166 / 288

Changing Default manualfeed
You can set your printer to manual feed for an indefinite period of
time. However, you have to enter the proper commands to reset the
printer to automatic feed. To set printer default to manual feed, send
the following commands exactly as they appear here.
The printer defaults to manualfeed immediately. To reset the
printer to automatic feed, enter the command /manualfeed false
def in place of the command shown as line 3.
WARNING! An error in any of the commands invalidates it.
For this reason, you may want to create a standard file for
manual feed, testing it to make sure it works.
C:\> edlin filename
New file
*i
1:*serverdict begin Ø exitserver
2:*statusdict begin
3:*/manualfeed true def
4:*^D
5:*^Z
*ex
C:\>
Chapter 9
9 - 1 0 P o s t S c r i p t : T e c h n i c a l O v e r v i e w