QMS Magicolor, User Manual

Page: 345 / 446

■ Is the printer properly connected via LocalTalk-type cable
and transformer boxes? (See chapter 3, “Connecting the
Printer,” for information.)
■
Is LaserWriter (and Laser Prep, if you are using
LaserWriter 6.0.x or later) installed in your System Folder?
■
In the Chooser, have you selected the LaserWriter icon and
highlighted the QMS magicolor or magicolor Plus printer?
■ Is AppleTalk active in the Chooser dialog box?
■ Are the screen fonts installed?
■ Is your application compatible with color PostScript Level
2? (Check the application manual. If your application
supports color PostScript Level 1 but not Level 2, try
setting the printer to Level 1 in the Administration/
Emulations/PostScript/Emulation Level menu.)
Mechanical Problems
Control Panel Selections Don’t Take Effect
■ Make sure you’re saving menu selections before exiting
the menu. (See “Saving Configuration Selections” in
chapter 4, “Printer Configuration.”)
■
Some configuration selections do not take effect until the
printer has been rebooted. Look in chapter 4, “Printer
Configuration,” to see if the selection you are making
requires a reboot.
Chapter 9
T r o u b l e s h o o t i n g 9 - 2 3