QMS Magicolor, User Manual

Page: 311 / 446

Installing System Software and Fonts from a PC to a
Non-Functional Printer
Follow these instructions to download system software and fonts
from a PC to a non-functional printer:
NOTE: These files take up about 5.5 MB of disk space when
extracted.
1. Insert the System Software/DOS disk (provided with your
printer) into your PC’s floppy disk drive.
2. At the DOS C:\ prompt, type the following command to
extract the system software file to your PC’s hard disk:
md \qmssys
↵
cd \qmssys
↵
a:system
↵
If the system software disk is in another drive, substitute the
name of that drive for
a.
3. Insert the System Fonts 1/DOS disk into your PC’s floppy disk
drive.
4. Type the following command to extract the first PostScript
fonts file to your PC’s hard disk:
a:af2psfn1
↵
5. Insert the System Fonts 2/DOS disk into your PC’s floppy disk
drive.
6. Type the following command to extract the second PostScript
fonts file to your PC’s hard disk:
a:af2psfn2
↵
7. Insert the PCL 5 Fonts/DOS disk into your PC’s floppy disk
drive.
Chapter 8
P r i n t e r O p t i o n s 8 - 5 3