QMS Magicolor, User Manual

Page: 284 / 446

record of your changes before you go to the next step. See
chapter 4, “Printer Configuration,” for information on
using the configuration menu.
10. In the printer configuration menu, use the Administration/
Miscellaneous/Restore Defaults option to make the printer
recognize the additional memory.
The Administration/Memory section in chapter 4, “Printer
Configuration,” and Appendix D, “Additional Technical
Information,” contain information about printer memory.
Installing a Network Interface
This section describes how to install a network interface.
NOTE: The interface card in the illustrations accompanying
these instructions may look slightly different from your
interface card, but the basic installation procedure is the
same.
Make sure you have all the parts necessary for the interface
installation. The network interface kit includes the following:
■ An anti-static wristband
■
A network interface card and two plastic support posts
■ A daughterboard and two plastic support posts (not needed
for CrownNet interface installation)
■ An external power supply box (not needed for all
interfaces)
■ An interface plate
Chapter 8
8 - 2 6 P r i n t e r O p t i o n s