QMS Magicolor CX, User Manual

Page: 22 / 222

QMS magicolor CX User's Guide 1-12
Installing
Macintosh
Printer Drivers
The amount of available space on your Macintosh hard disk
and the amount of space necessary for all of the selected
drivers are indicated near the bottom of the window.
» Note: If you’re using Custom Install, you can click the small icon
to the right of each install option for more information about that
option.
5 Click Install to begin the installation.
The Installer places the GX drivers in the Extensions folder inside
the System folder. It also creates a QMS GX Drivers folder in the
hard disk window. Inside this folder is the Installer log file, which
you can view to verify the installation.
When the installation is finished, a dialog box prompts you to
choose Continue to install additional drivers from the Custom
install option or to choose Quit to exit the Installer program.
Creating a Printer Icon
Before you can print, you must create a desktop printer icon.
1 Make sure the printer is on and on line.
2 From the Apple menu choose Chooser.
3 In the Chooser window, select the CX GX Driver icon.
» Note: If your printer is connected to a network with multiple
zones, rather than connected directly to your Macintosh, in the
AppleTalk Zones box select the zone in which your printer is
located.
4 Click Create.
The printer icon for the selected printer is created and is placed
on the desktop.
5 Exit from the Chooser.
6 Click the desktop printer icon you just created to select it.