QMS DeskLaser 1600 User Manual
1-13
5.
Prepare a paper stack.
Prepare paper of the size
indicated by the size label.
Fan the paper stack both ways
to prevent sheets from
sticking together.
Notice:
Put the paper stack in the paper tray with the printing side faced down.
If paper is curled, remove the curl.
6. Load the paper. Place the
front portion of the paper
stack on the tray and slide it
backwards so that the stack is
placed under the two
stoppers. Gather the edges of
the stack together to ensure
correct positioning of paper
in the tray.
Make sure the stack does not
exceed the limit mark.
7.
Adjust the side guides.
Push
the outer PUSH mark of
either side guide to the width
of paper. Align the rear edges
of the paper stack.
☞
Limit mark
Bad placement
Good placement
