Software
Installation
QMS CrownNet Setup Guide
26
For
device_filename
, substitute the complete pathname of the
device file associated with the CD-ROM drive.
10 Add the name of the directory containing crnadm (the direc-
tory in which you extracted the sunos.tar file) to your path.
11 Install the UNIX Host Software, following the instructions in
“Installing the UNIX Host Software” on page 30.
Installing CrownAdmin 3 for Windows
CrownAdmin 3 for Windows is a software utility that allows you to
monitor and configure QMS printers and perform network operations
on printers connected to your network.
System Requirements
You must have the following to run CrownAdmin 3 for Windows:
n
Windows 3.1, Windows 95, Windows for Workgroups 3.11, or
Windows NT 3.5/4.0 on an IBM or compatible PC
n
At least a 386 with 8 MB or more RAM and 10 MB of free hard
disk space
n
A Winsock 1.1-compliant stack—if you require TCP/IP compatibil-
ity
Installation
1
Insert the CD-ROM in the CD-ROM drive.
»
Note:
If you’re using Windows 95 or Windows NT, the CD-ROM
boots automatically.
2
If you’re using Windows NT or Windows 95, or if you already
have Windows 32s installed, skip to step 3.
If you don’t currently have Win32s installed, install it now.
▲
Caution:
You must do this before installing CrownAdmin 3.
a
From the Start menu choose Run...
Summary of Contents for Crownnet
Page 1: ...QMS CrownNet Setup Guide 1800329 001H ...
Page 6: ......
