QMS 2425, Reference

Page: 79 / 244

'XSOH[LQJ
3ULQWHU&RQILJXUDWLRQ
2XWSXW)LQLVKLQJ
When the Stackler is installed, the Output Finishing menu supports
three modes for face-down print delivery: simple stacking, job offset
stacking, and stapling; for face-up delivery only simple stacking is
supported.
6WDSOLQJ0HGLD
Staple staples up to 20 sheets of paper.
2IIVHW6WDFNLQJ0HGLD
Offset Stacking shifts the first page of the print job to the right. All sub-
sequent pages of the job are not offset.
Menu Operator Control/Output Finishing/Staple
Choices Off, Front Corner, Back Corner, Center
Default Off
Notes See appendices B “Technical Specifications,” for details on
stapling and stack capacity.
Menu Operator Control/Output Finishing/Offset Stacking
Choices On, Off
Default Off