QMS 2425, Reference

Page: 120 / 244

(QJLQH
406785%23ULQW6\VWHP5HIHUHQFH
6HWWLQJ(QHUJ\&RQVHUYDWLRQ
The Energy Saver option specifies whether the printer changes to a
low-power state (the engine remains on, but the fuser turns off) after
the printer is inactive for a user-defined length of time. When a print
job is received, the printer returns to normal power within 90 seconds.
6HWWLQJ7RQHU'HQVLW\
The Toner Density option adjusts the density of the toner that is laid
down on the paper.
6HWWLQJ0DQXDO)HHG7LPHRXW
This option allows you to set the amount of time the printer waits for
paper to be inserted into the multipurpose tray before it cancels the
job.
Menu Administration/Engine/Energy Saver
Choices
15 minutes, 30 minutes, 1 hour, 2 hours, 3 hours—Idle
time before activation of low-power state.
Off—Use normal power all of the time.
Default 1 hour
Menu Administration/Engine/Toner Density
Choices
00 - 15
00—Lightest setting
15—Darkest setting
Default 07
Menu Administration/Engine/Man. Feed Timeout
Choices
000 - 300 seconds
Default 060 seconds
Notes
A value of 000 sets the timeout to infinity