QMS 2425, Operation Manual

Page: 98 / 186

0HGLD-DPV
406785%23ULQW6\VWHP2SHUDWLRQ
5 If nothing prints at all, do an engine test print.
Use a paper clip that has been straightened and insert it gently
into a small square access hole on the right side of the printer
near the back. The printer should print a vertical line test print.
0HGLD-DPV
0HGLD3DWK
Understanding how media travels inside the printer helps you better
handle media jams.
After a sheet of media is fed manually or from a tray, cassette, or input
bin, it travels to the toner cartridge where toner is attracted onto the
media by means of the laser beam. Then, the media moves to the fix-
ing assembly area where toner is fused to it. Finally, the media comes
out from either the face-down or face-up tray, depending on the media
delivery selected.