QMS 2060, Supplementary Manual

Page: 55 / 160

8VLQJD6HULDO
,QWHUIDFH
,QWHUIDFHVDQG'DXJKWHUERDUGV
,JQRUH3DULW\(UURUV
Specifies how the printer should handle parity errors.
5HFHLYH6RIWZDUH)ORZ&RQWURO
Sets the software communication protocol used by the printer to con-
trol communication from the host computer.
7UDQVPLW6RIWZDUH)ORZ&RQWURO
Sets the software communication protocol used by the host computer
to control communication with the printer.
Notes The printer’s parity setting must match that of the host
or application.
Use the Administration/Communications/Serial/Ignore
Parity menu to specify how the printer handles parity
errors.
Menu Administration/Communications/Serial/Ignore Parity
Choices Off—Ignore parity errors. The printer prints its best
interpretation of the character(s) affected by the error.
On—Don’t ignore parity errors. The printer replaces the
character(s) affected by the error with a question mark.
Default Off
Notes Use the Administration/Communications/Serial/Parity
menu to set parity.
Menu
Administration/Communications/Serial/Rcv Sw Flow Ctl
Choices ETX/ACK, Robust XON/XOFF, None, XON/XOFF
Default
XON/XOFF
Menu
Administration/Communications/Serial/Xmit Sw Flow
Ctl
Choices ETX/ACK, None, XON/XOFF
Default
None