19
4
Connect the 2001 to a grounded electrical outlet.
Note:
Make sure the electrical outlet you connect the system
to is a properly grounded (earth connection) outlet, running
120 VAC, 50-60 Hz (if you have a 110V unit), or 230 ±10 VAC,
50 Hz (if you have a 220V unit). The system should be
directly connected to an outlet.
5
Connect the monitor to a grounded electrical outlet
and turn it on.
6
Turn on the 2001. When the Ready light stops blink-
ing, the system is ready to use.
(When you’re ready to shut down the system, turn off the
monitor first, then the 2001.)
-!/ÌÕææ¥ÌÞkbkÌ/àÅÎkÌ,Ì
kXÎÂXÌ.kÅÎÂ@Î
1
With Windows running, in Program Manager double-
click the QMS 2001 Knowledge System program
group icon to open it (if it’s not already open).
2
In the QMS 2001 Knowledge System program group,
double-click the Registration icon to open the Regis-
tration dialog box.
3
Enter the information requested in the Registration
dialog box. The software version number is on the
disks shipped with your system.
4
If the QMS 2001 Fax Server icon appears anywhere
on your Windows desktop, close it by clicking on it
once and then selecting Close from the menu that
appears.
5
In the QMS 2001 Knowledge System program group,
double-click the QMS Manager icon to start QMS
Manager (if it’s not already started).
6
In QMS Manager, choose Document Storage from the
Window menu.
7
In the Document Storage list, select REGCARD.
If REGCARD does not appear in the Document Storage
window, make sure you followed the instructions in step
4, above.