QMS 1725E, Reference

Page: 18 / 288

Introduction
QMS 1725E Print System Reference 2-2
Introduction
This chapter lists the media sizes and imageable areas supported by
the QMS 1725E Print System, and then provides information on
selecting and storing media.
Media Sizes and Imageable
Areas
Your printer supports media of different sizes. Each media size has a
certain imageable area, the maximum area on which the printer can
print. This area is subject to both hardware limits (the physical media
size and the margins required by the printer) and software constraints
(the amount of memory available for the full-page frame buffer).
» Note: The media size must match the cassette size. Since the cassette
sends a size signal to the printer controller, using the wrong size media will
cause your image to be positioned incorrectly on the page or clipped. You
may purchase additional cassettes from your QMS vendor.
The following table lists the size, imageable area, and feed edge (the
edge of the media drawn into the printer first) of all supported media:
Media Media Size Imageable Area
Inches Millimeters Inches Millimeters
A4
8.27x11.69 210.06x296.93 7.92x11.38 201.38x289.22
Executive 7.25x10.50 184.15x266.70 6.94x10.16 176.44x258.06
Legal
Letter 8.50x14.00
8.50x11.00 215.90x355.60
215.90x279.40 8.18x13.66
8.16x10.69 207.94x346.96
207.26x271.61