QMS 1060, User Manual

Page: 120 / 311

Printer Engine
Features
QMS 1060 Print System Reference 4-86
Toner Out Action
You can configure the printer to stop when a
TONER OUT
error mes-
sage is displayed in the message window or to continue printing.
Setting Energy Conservation
Your printer is compliant with US Environmental Protection Agency
(EPA) Energy Star regulations. The EPA Energy Star Computers pro-
gram promotes the use of energy-efficient personal computers, moni-
tors, and printers and the reduction of air pollution caused by power
generation.
The Energy Star option specifies whether the printer changes to a
low-power state (the engine remains on, but the fuser turns off) after a
a specified time of inactivity. When a print job is received processing
begins immediately, the printer returns to normal power within 90 sec-
onds.
Menu Administration/Engine/Toner Out Act.
Choices Continue—Continue printing when a
TONER OUT
message
displays.
Stop—Stop printing when a
TONER OUT
message
displays.
Default Continue
Notes When this message is issued, there is still some toner
left in the cartridge (enough for approximately 100 prints
or less) but print quality may be deteriorated. This would
be a good time to redistribute the remaining toner, and
order a replacement cartridge.
Menu Administration/Engine/Energy Saver