10/09/2014 15:16 Page 3
Roman Blinds
1. Check you have a full set of new Alkaline D Cell batteries ready
to install.
2. Carefully remove the fabric away from the Velcro on the front
cover of the headrail.
3.
Remove the front cover of the Head Rail, it is tight so take care
not to mark or damage the fabric, use a flat tool to make it
easier.
4.
On the right hand side you will see the motor and battery
assembly.
5.
Remove the old batteries, they are held in place by a spring
so the 1st one will be tight.
6.
Install the new batteries taking care to insert them the correct
way.
7.
The last battery will be tight.
8.
Replace the Head Rail cover making sure it is seated correctly
and inline.
9.
From the controls send the blind to its upper position.
10.
If the new batteries are installed within 30 minutes the blind will
retain all of its settings and limits.
11.
Recycle the old batteries .