Switching it ON
To switch on the pack, push the button on the units
front, next to the indicator LEDs. All LEDs will flash
three times simultaneously to indicate it is starting up
and only one LED will stay illuminated. This is the one
that has 5V printed next to it, meaning output is now
5V. You need 12 V for use with Qmaster Senior. Hold
the button until the voltage LED skips to the next and
repeat 3 times until 12V is selected. It is now ready for
use with Qmaster Senior.
Remaining Capacity
When in use, the pack will display the remaining capacity by means of the LEDs in 20%
increments. (20, 40, 60, 80, 100)
Switching it OFF
The pack can only be switched OFF if 12V was selected. If it wasn't, select it first by stepping
through output voltages as described above. Then hold the button until the LEDs will consecutively
go out, indicating it's shutting down.
