3
Step 4. Apply Power to the Switch
❑
Attach the supplied power cable to the
switch and wall outlet or power strip.
Verify that the Input Power LED is on.
❑
The switch runs its self tests and begins
normal operation – this may take a few
minutes. Verify that the Heartbeat LED is
blinking (once per second) and the
System Fault LED is NOT illuminated.
NOTE:
The SB3050-XXX-E switch comes
complete with pre-configured zones for the
EMC ClARiiON AX
100
™. Follow the diagram
below to connect to your devices. If desired,
use the SANbox Manager Application to
perform advanced switch configuration.
Zone Name
Switch Ports
Zone 1
1, 0
Zone 2
1, 4
Zone 3
2, 0
Zone 4
2, 4
Zone 5
3, 0
Zone 6
3, 4
Zone 7
7, 0
Zone 8
7, 4
Zone 9
5, 0
Zone 10
5, 4
Zone 11
6, 0
Zone 12
6, 4
INPUT
POWER LED
HEARTBEAT
LED
SYSTEM
FAULT LED
The pre-configured zone names and switch
port numbers are listed in the Pre-configured
AX
100
Zones table.
Pre-configured AX
100
Zone Table
