7
8.
The
Found New Hardware Wizard with Network Controller
message displays. The Found New
Hardware Wizard program is launched to begin installing the iSCSI driver for the
QLogic iSCSI HBA
.
9.
Select
Install from a list or specific location (Advanced)
. Click
Next
.
10.
Select the
Search for the best driver in these locations
option. Type or browse the path to the directory
where you stored the driver files (see
Step 2
).
11.
In the
Hardware Installation - Windows Logo
dialog box, click
Continue Anyway
.
12.
In the
Completing the Found New Hardware Wizard
dialog box, click
Finish
.
Windows Vista
Initial Operating System Installation with the Host Bus Adapter Driver as Boot or as an Add-On
Perform the following steps to install the Windows Vista operating system and the host bus adapter driver (as boot as
or as an add-on):
1.
Start the Windows installation procedure using the Setup CD.
2.
The following message displays:
Which type of installation do you want?
Select
Custom (Advanced)
.
3.
The following message displays:
Where do you want to install Windows?
Select
Load Driver
.
4.
Download and save the host bus adapter driver to your hard drive:
a.
Type or browse the path to the QLogic driver directory on the applicable
SANsurfer for SANblade
iSCSI HBAs
CD. For example:
<
CD-ROM Drive Letter
>:\autoplay\iSCSI_HBA_drivers\Windows
b.
Locate and launch (double-click) the executable (.exe) file containing the driver.
c.
When prompted, type or browse to a location on your hard drive to store the driver files. Click
OK
.
5.
At the Load Driver screen, type or browse the path to the directory where you stored the driver files
<blue text>(see step 4), then click OK.
6.
Click
Next
to continue with the standard installation procedure.
Adding the Host Bus Adapter Driver to an Existing Operating System
Perform the following steps to add the host bus adapter driver to an existing operating system:
1.
After installing the iSCSI host bus adapter and restarting your computer, download and save the host
bus adapter driver to your hard drive:
a.
Type or browse the path to the QLogic driver directory on the applicable
SANsurfer for SANblade
iSCSI HBAs
CD. For example:
<
CD-ROM Drive Letter
>:\autoplay\iSCSI_HBA_drivers\Windows
b.
Locate and launch (double-click) the executable (.exe) file containing the driver.
c.
When prompted, type or browse to a location on your hard drive to store the driver files. Click
OK
.
2.
Windows detects the newly installed device and displays the
Found New Hardware
message.
The Hardware Update Wizard program starts installing a device driver for the newly installed device.
3.
Select the Driver tab, then click
Update Driver
to start the Hardware Update Wizard.
4.
Select
Browse my computer for driver software
, then click
Next
.
5.
Select
Let me pick from a list of device drivers on my computer
, then click
Next
.
6.
Click
Have Disk
.
