A – Fast!UTIL
Configuration Settings
FC2251101-00 D
A-3
Some new system BIOSs support selectable boot, which supersedes the Fast!UTIL
selectable boot setting. To boot from an FC hard disk attached to the QLA23xx
board, select the QLA23xx board FC hard disk on the system BIOS.
NOTE: This option applies only to hard disks; it does not apply to tape drives and
other nondisk devices.
A.2.3
Restore Default Settings
The Restore Defaults option from the Configuration Settings menu restores the
QLA23xx board default settings.
A.2.4
Raw NVRAM Data
This option displays the adapter’s NVRAM contents in hexadecimal format. This is
a QLogic troubleshooting tool; you cannot modify the data.
A.2.5
Advanced Adapter Settings
From the Configuration Settings menu in Fast!UTIL, select Advanced Adapter
Settings. The default settings for the QLA23xx board are listed in
table A-2
and
described in the following paragraphs.
Table A-2. Advanced Adapter Settings
Setting
Options
Default
Execution Throttle
1–256
16
Fast Command Posting
Enabled, Disabled
Disabled
>4GByte Addressing
Enabled, Disabled
Disabled
Luns per Target
0, 8, 16, 32, 64, 128, 256
8
Enable LIP Reset
Yes, No
No
Enable LIP Full Login
Yes, No
Yes
Enable Target Reset
Yes, No
No
Login Retry Count
0–255
8
Port Down Retry Count
0–255
8
Drivers Load RISC Code
Enabled, Disabled
Enabled
Enable Database Updates
Yes, No
No
Disable Database Load
Yes, No
No
IOCB Allocation
1–512 buffers
256 buffers
Extended Error Logging
Enabled, Disabled
Disabled