manualshive.com logo in svg

Qlogic QLogic Fibre Channel Switch, User Manual, Page: 37 / 56

Share
Download
Qlogic QLogic Fibre Channel Switch User Manual Download Page 37

Troubleshooting

Troubleshooting with Driver Logs

FC0054606-00  A

A-5

A

Troubleshooting with Driver Logs

All messages from the QLogic FC adapter driver are logged in 

/var/log/vmkernel

. These messages provide additional information about the 

driver operation: both normal and driver warnings. Messages from the driver are 
usually preceded by

 scsi(%d)

, where

 %d 

is the adapter instance number.

The following example shows a snippet from a

 vmkernel 

file:

Nov 12 16:11:49 localhost vmkernel: 0:00:00:04.754 
cpu1:1036)<6>qla2x00_set_info starts at address = 0x8b0000
Nov 12 16:11:49 localhost vmkernel: 0:00:00:04.754 
cpu1:1036)<6>qla2x00: Found  VID=1077 DID=2432 SSVID=1077 
SSDID=138 pdev=0x2869668
Nov 12 16:11:49 localhost vmkernel: 0:00:00:04.754 
cpu1:1036)qla2x00_detect(0): subsys_vend=0x1077 subsys_dev=0x138
Nov 12 16:11:49 localhost vmkernel: 0:00:00:04.754 
cpu1:1036)<6>scsi(0): 64 Bit PCI Addressing Enabled.
Nov 12 16:11:49 localhost vmkernel: 0:00:00:04.756 
cpu1:1036)<7>scsi(0): Allocated 4096 SRB(s).
Nov 12 16:11:49 localhost vmkernel: 0:00:00:04.756 
cpu1:1036)<7>PCI: Setting latency timer of device 1f:00.0 to 64
Nov 12 16:11:49 localhost vmkernel: <6>bnx2: vmnic0 NIC Copper 
Link is Up, 100 Mbps full duplex
Nov 12 16:11:49 localhost vmkernel: 0:00:00:06.410 
cpu1:1036)scsi(0): Waiting for LIP to complete...
Nov 12 16:11:49 localhost vmkernel: 0:00:00:07.196 
cpu1:1036)<6>scsi(0): LOOP UP detected.
Nov 12 16:11:49 localhost vmkernel: 0:00:00:07.502 
cpu1:1036)<6>qla2x00_fw_ready ha_dev_f=0x0

Table A-6

 lists the more common driver log messages and provides an 

explanation of each. 

Table A-6. Common Driver Log Messages

"qla2x00_set_info starts at address = 

xxxxxxxx

"

Driver is reporting the starting address where the driver was loaded in case an oops occurs in the driver.

"qla2x00: Found VID=

xxxx

 DID=

yyyy

 SSVID=

zzzz

 SSDID=

vvvv

"

Driver is reporting which adapter it has found during initialization. 

"scsi(%d): Allocated 

xxxxx

 SRB(s)"

Driver is reporting the number of simultaneous commands that can be executed by the adapter. The 

max_srbs 

option (see 

Table 3-1 on page 3-7

) can change this number.

Summary of Contents for QLogic Fibre Channel Switch

























































Reviews:

No comments