A – Compliance, Specifications, and Agency Certification
Transceiver Label
A-2
FL0054601-00 B
A.3
Transceiver Label
The transceiver on the QLA200 HBA is a Class I laser product. It complies with
IEC 825-1 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be
operated under recommended operating conditions.
NVRAM
256 bytes, field programmable
Onboard DMA
Five-channel DMA controller: two data, one command, one
auto-DMA request, and one auto-DMA response
Frame buffer FIFO
Integrated 4-KB transmit and 6-KB receive frame buffer FIFO for
each data channel
Transceivers
LC-style connector that supports non-OFC, multimode fibre optic
cabling using a small form factor optical transceiver module
Form factor
11.99 cm
×
6.44 cm (4.721"
×
2.536")
Operating power
Approximately 5 watts
Table A-2. QLA200 Board Operating Environment
Environment
Minimum
Maximum
Operating temperature
0
°
C/32
°
F
55
°
C/131
°
F
Storage temperature
–20
°
C/–4
°
F
70
°
C/158
°
F
Relative humidity (noncondensing)
10%
90%
Storage humidity (noncondensing)
5%
95%
Table A-1. QLA200 Board Specifications (Continued)
Type
Specification
CLASS I LASER PRODUCT
