Qlogic QLA200 HBA, User Manual

Page: 17 / 54

FL0054601-00 B 3-1
Section 3
SANsurfer HBA Install Wizard (Windows 2000/Server 2003)
3.1
Introduction
The SANsurfer HBA Install Wizard does the following:
■
Installs the QLA200 HBA driver for Windows 2000/Server 2003 operating
systems
(see section 3.2)
■
Updates the QLA200 HBA driver for Windows 2000/Server 2003 operating
systems
(see section 3.3) . (To remove the driver, see section 3.4 .)
■
Performs diagnostics on the QLA200 HBA and its attached devices (see
section 3.5)
The SANsurfer HBA Install Wizard is on the SANsurfer Fibre Channel HBA Software
CD-ROM (CD), and can be run from the CD at any time. To run the wizard from the
server (optional), see the instructions in
section 3.2 .
3.2
Installing the Driver
If you have installed the QLA200 HBA in a Windows 2000/Server 2003 operating
system, follow these instructions to launch the SANsurfer HBA Install Wizard, which
installs the HBA driver automatically.
When the system is powered on, the Microsoft Found New
Hardware Wizard dialog box (plug-and-play installation process)
may display (see figure 3-1) . Click Cancel . You may have multiple
dialog boxes if more than one QLA200 HBA is installed in the
system. Click
Cancel in each dialog box.
Figure 3-1. Found New Hardware Wizard Dialog Box
NOTE