1 – Introducing the QLA200
System Requirements
1-4
FL0054601-00 B
1.4
System Requirements
Your system must have the following functionality to support the QLA200 HBA:
■
One of the following:
❑
PCI 32-bit data and 33/66 MHz clock frequency
❑
PCI-X and 66/100/133 MHz clock frequency
■
3.3-volt signaling (5-volt tolerant)
■
The correct media (short wave 50
µ
m fiber or 62.5
µ
m fiber) and connectors
(LC duplex)
1.5
Installing the QLA200 HBA and Driver
Installing your QLA200 HBA is quick and easy:
First,
install the QLA200 HBA according to the directions in
Second,
install the software driver according to the directions in the section that
corresponds to your computer’s operating system:
Operating System
Section
Windows
2000/Windows Server 2003
Red Hat
/SuSE
Linux
Novell NetWare