Qlogic QLA200 HBA, User Manual

Page: 11 / 54

1 – Introducing the QLA200
QLA200 HBA Components
FL0054601-00 B 1-3
1.3
QLA200 HBA Components
The QLA200 HBA contains parts that can be damaged by
electrostatic discharge (ESD). Before handling the QLA200 HBA,
use standard methods to discharge static electricity. Keep the
QLA200 HBA in the antistatic bag until you are ready to install it.
Place the board on the bag when you examine or configure it. Retain
the bag for future use.
Figure 1-2 identifies the QLA200 HBA components referenced throughout this
section.
Each QLA200 HBA has a unique serial number; its location on the HBA is noted in
figure 1-2 . Take a minute to write down the serial number of the QLA200 HBA on
the inside cover of this document. The serial number is required for QLogic technical
support and for your HBA warranty.
Figure 1-2. QLA200 HBA Layout
CAUTION!
Green
LED
Yellow
LED Activity
❍ ❍
Power off
● ●
Power
● ❍ Online
❍ ●
Link established
❍ Flashing
twice per
second
Loss of
synchronization
Green and Yellow LEDs
flashing alternately twice per
second
Firmware error
SERIAL
NUMBER
LEDs
TRANSCEIVER