Qlogic QConvergeConsole CLI 2400 Series, User Manual, Page: 88 / 366

5–Fibre Channel Noninteractive Commands
-kr (Run Read/Write Buffer Test)
5-20 SN0054667-00 C
Run Adapter Diagnostics Read-write Buffer Test
The
{(-ex | exclude) < target wwpn >}
parameters specify a device that
will be excluded from the read/write buffer test.
The system shows the following information after a read/write buffer test
completes:
 Loop ID/status
 Data miscompare
 Link failure
 Loss of sync
 Loss of signal
 Invalid CRC
Table 5-6 lists the <
param name
>, <
param alias
>, and
< param value >
options.
Table 5-6. Diagnostics Parameters
Name
<param name>
Alias
<param
alias>
Value
<param value>
Description
DataPattern DP
Test pattern in hex for-
mat
a
Customized (00–FF)
Random pattern
CRPAT
b
CJTPAT
c
CSPAT
d
00, 55, 5A, A5, AA, FF (see
Table 5-7 )
—
—
Loopback test only
Loopback test only
Loopback test only
DataSize e
DS
8, 16, 32, 64, 128, 256,
512, 1024, 2048 Actual data transferred dur-
ing any given pass of the
test
TestCount f
TC
0–65535
0–10,000 Loopback test only
Read/write buffer test only
TestIncrement g
TI
1–65535
1–10,000 Loopback test only
Read/write buffer test only
OnError OE
0–2 0 = ignore
1 = stop
2 = loop on error