Qlogic FastLinQ 3400 Series, User Manual

Page: 22 / 287

Preface
Related Materials
xxii 83840-546-00 E

Chapter 5, Linux Driver Software describes the Linux
®
drivers.

Chapter 6, VMware Driver Software describes the VMware
®
drivers.

Chapter 7, Firmware Upgrade describes the installation and use of the
firmware upgrade utility.

Chapter 8, iSCSI Protocol describes iSCSI boot, iSCSI crash dump, and
iSCSI offload for Windows, Linux, and VMware.

Chapter 9, Fibre Channel Over Ethernet describes FCoE boot from SAN
and booting from SAN after installation.

Chapter 10, NIC Partitioning and Bandwidth Management describes the
NPAR operating system requirements and the NPAR configuration
parameters.

Chapter 11, Virtual LANs in Windows describes the use of VLANs to divide
the physical LAN into functional segments.

Chapter 12, SR-IOV describes the use of Single-Root I/O Virtualization
(SR-IOV) to virtualize network controllers and how to enable SR-IOV.

Chapter 13, Microsoft Virtualization with Hyper-V describes the use of
Microsoft
®
Hyper-V
®
for Windows Server 2008 and 2012.

Chapter 14, Data Center Bridging (DCB) describes the DCB capabilities
configuration, and requirements.

Chapter 15, QLogic Teaming Services describes the use of teaming to group
multiple physical devices to provide fault tolerance and load balancing.

Chapter 16, Configuring Teaming in Windows Server describes the teaming
configuration for Windows Server
®
operating systems.

Chapter 17, User Diagnostics in DOS describes the MS-DOS based
application that runs diagnostic tests, updates device firmware, and
manages adapter properties.

Chapter 18, Troubleshooting describes a variety of troubleshooting methods
and resources.

Appendix A, Adapter LEDS describes the adapter LEDs and their
significance.
Related Materials
For information about downloading documentation from the QLogic Web site, see
“Downloading Updates” on page xxv .