Qlogic Fast Fabric, User Manual

Page: 52 / 174

4 – Fast Fabric TUI Menu
SilverStorm Externally Managed IB Switch Administration via Fast Fabric
4-14 D000006-000 Rev A
Q
4.4
SilverStorm Externally Managed IB Switch Administration via Fast
Fabric
This menu is focused on administration of SilverStorm 9024FC externally managed
switches.
SilverStorm Technologies Inc. IB Switch Admin Menu (4.1.1.0.15)
Fast Fabric Externally Managed Switch List:
/etc/sysconfig/iba/ibnodes
0) Edit Config and Select/Edit Switch Files [ Skip ]
1) Verify Switch via Firmware dump [ Skip ]
2) Update Switch Firmware [ Skip ]
3) Reboot Switch [ Skip ]
4) View ibtest result files [ Skip ]
P) Perform the selected actions
N) Select None
X) Return to Previous Menu (or ESC)
4.4.1
3.4.1Edit Config and Select/Edit Chassis Files
(Switch) This will permit the
ibnodes
and
fastfabric.conf
files to be edited.
The
ibnodes
file selected and created via this menu should not list the Fast Fabric
host itself. After editing the two files, an opportunity is given to edit them again or
continue forward.
Selected Chassis File: /etc/sysconfig/iba/chassis
Do you want to edit/review/change the files? [y]:
The default will repeat the editing process, answer
n
to proceed to continue forward.
Refer to the section “Selection of Switches” on page 5-7 for more details about the
format of the ibnodes file.
4.4.2
Verify Switch via Firmware Dump
(Switch) Use of this option is not recommended.
4.4.3
Update Switch Firmware
(Switch) This will run the
ibtest -n
upgrade command to permit the switch
firmware version to be updated and the switch node name to be set.